Пт, 19 авг 2016 Автор: Аврамов Алексей
Wedding is an event not only for the bride and groom, but also for
guests. You can make an unforgettable holiday yourself. For example,
wedding invitations will look very nice
do it yourself
Contents
Wedding invitation in the form of an ancient scroll
by hands
To remember your wedding for a long time, you need to surprise the guests.
before it starts. A variety of invitations to help
свадьбу, в особенности те, которые сделаны do it yourself
To make an unusual invitation to you
perform the following actions:
1. Take A4 paper with the text of the invitation. Its best
print in font by Monotype Corsiva
2. Then burn the edges of the paper.
3. Take water, dissolve coffee in it. Contrast
determine by eye. After preparing the solution, take and
dip each invitation into it.
4. Lay each invitation on a clean and dry surface.
To get an even more unusual invitation, put on each
from them on a granule of coffee.
5. While the leaves are dry, you can prepare labels with names.
guests. To do this, print them, and then do those
the same procedures as with the invitation itself.
6. In each nominal sheet you need to make a hole.
7. When everything is dry, roll the scroll, twist it with a rope and
secure on each name tag.
8. In order to give greater likelihood of “antiquity”
invitations, you can put a stamp on each of them. Of course,
pleasure is not cheap, but the wedding happens once in a lifetime.
9. The seal is made of wax. First you need to do
printing, the temperature of wax should be medium. To print not
prevented the opening of the envelope and lasted until the presentation of the guest,
Choose the optimum temperature. First you need to apply sealing wax, and
then proceed to install them at the invitation.
10. In such a great way, you can make it very beautiful.
приглашение на свадьбу do it yourself
Самое романтичное приглашение на свадьбу своими by hands
To create them you will need: cardboard, A4 paper, punch,
scissors, laces, ribbons, lighter, bamboo stick, glue,
ruler, printed invitation text.
The finished invitation text should be printed on the printer,
it can be decorated with drawings and inscriptions. Best cut not
The usual rectangle, and the waves, so it will be more beautiful.
Step 1: Punch a hole in the upper edge.
Step 2: We put the sheet with the text on the cardboard and mark its size, but
with an increase of 0.5 cm. also measure the second half
an envelope.
Step 3: We fold one of the pieces of cardboard. On the other, above,
cut a triangle, glue.
Step 4: On the inside of the invitation, at the top, punch
the hole.
Step 5: Decorate the front side with lace. Best neat
to glue.
Step 6: Glue the envelope. Then put the text inside
invitations.
Step 7: Put a ribbon in the punctured hole and tie a beautiful one
bow.
Step 8: We fasten the wide ribbon on the front of the invitation,
and fasten with glue. To the ends of the tape did not break up, you can
cauterize.
Step 9: Bow, envelope can be decorated with rhinestones and sparkles.
Очень красивое приглашение на свадьбу своими by hands
To create it you will need:
1. Textured paper
2. Watercolor paper + pastel paper
3. Plain sheet of paper
4. Satin ribbon
5. Beads
6. Glitter
7. Rhinestones
8. Clay
9. Lace
10. Scotch
First you need to print the word “Invitation” in the amount
равном числу guests. Then take the pastel paper, it can be
any nice and discreet color, we dip the lace in acrylic paint
and put on paper, we press. To make a steady pattern,
add glue to paint. At the onset of a few seconds of lace
remove and give the paint to dry.
The invitation consists of three sheets, cut them. Central
the sheet should be wider than the rest. Central лист делается из
watercolor paper, and the rest from pastel.
The edges of each sheet need to be rounded. After doing these
procedures, all three parts of the invitation need to be glued. For this
it is necessary to fold and smear glue on each of them, then
press and wait a minute until the glue sticks together.
If you have a figure punch, then the lace can not
buy and make the most.
Decorative tapes are glued to the base in any way you like.
place Next to the lace we glue the satin ribbons, it should be
fine.
From textured paper cut two hearts of different sizes. Take
double-sided tape, and glue it on the hearts, and then closer to
edge of the invitation.
On a smaller heart set bows, made of ribbon, in
middle sticking rhinestones. After all this, at its discretion,
Decorate the invitation with rhinestones, sparkles.
Importantly, do not forget to glue the “Invitation” sign with
double sided tape. Inside the resulting envelope we stick text
invitations. These are the resulting invitation!
Сделав такие пригласительные на свадьбу своими by hands, you,
surely surprise your guests and loved ones. Although required
time and money, but it is not to no avail. Wedding is
such an event to which you need to give all their strength so that it
remained in memory for many years.
