Swans from the tires with their own hands – amazingdecoration for the garden! Detailed master class: the swansby hands

In connection with the beginning of the holiday season, I suggest your
attention of the wonderful swans, which you can do without any problems
своими by hands.

Homemade swans will beautifully decorate your plot and bring
a lot of joy to you and your loved ones.

Лебедь своими by hands. Getting started!

For the manufacture of a swan, we need:

• Car tire;

• Screws and bolts for fastening parts;

• Strong, tough wire for swan frame or resilient
rod;

• Chalk (you can use regular colored chalk);

• Ruler;

• Ideally, an electric jigsaw is needed, but it will do very well
sharp knife;

• Electric drill;

• The paint is white or black (depending on the color of your
future swan) and red – for the beak;

• Construction brushes;

• Garden clamp (optional).

Подготовка шины для изготовления лебедя своими by hands

First you need to prepare a little tire itself. To us
everything turned out, you must first wash and dry it.
To create a swan is best to prepare the workplace in the fresh
the air and the sun. After your preparation is final
dried up, we take crayons and we strip the tire, carefully thinking through
the location of the neck of the wings and tail.

So that you can imagine what the neck should look like, the head
and the swan’s beak, I will give you an example of a tire already cut.

Keep in mind that this is just an example, you can come up with
his swan, which no one else will be!

The length of the neck of a classic swan must be at least half
total wheels (about 95 cm.). The length of the beak is about 9 cm., And the head
10 cm. Tail somewhere 40-50 cm.

It is worth adding that if you want to make your swan
volumetric and more realistic head, it is better to draw it
a little wider. So, the sketches are ready!

The next step we take electric jigsaw or ordinary
a sharp knife and begin to cut all the details strictly along the contour.
You need to work slowly and smoothly, because the main thing in swans
symmetry. In the event that your hand suddenly trembled, or
some other reason you cut the tire in the wrong place, then not
It is worth worrying, there is super glue. He will fix it. But still not
it is necessary to allow such accidents. Next, make cuts along the bus
where there should be wings and bend them to the sides for greater
plausibility. Just do not overdo it and do not break
tire. Here is the body of your swan.

But this is not the end, because if we dwell on this
stage, you have to endlessly support the little animal so that it does not
was falling. Need to prepare the frame. It is for these purposes and need
there was a wire. Only the wire must be very hard, otherwise
nothing happens, and the swan will lurch from side to side.
If you have not found such a wire, you can replace it
ordinary flexible rod or narrow metal plate. Length
wire should be about a meter and a half. To reliably
secure the wire on the inside of the tire, you have to
use screws or bolts.

Add your swan some more believability and volume
help drill. It is only necessary to make two symmetrical holes in the head.
and tighten them with a garden clamp. For embossed eye can also
apply screws. The main thing is not to forget to paint them, otherwise they will
barely noticeable.

Покраска лебедя, сделанного своими by hands

Only after the swan has acquired its usual external
view and beautiful posture, you can start painting. First need
prepare the territory, since, you will not be very nice then
look at the colorful lawn paint. To avoid such
unpleasant things, you need to lay the workplace before work
newspapers in two layers.

Well, now that the territory has been prepared, you can continue
work By the way, black swan is pretty easy to color that
can not be said about white! To paint over a regular black tire without
baldness, you must apply at least three layers of white paint. AT
As a working tool, the most suitable will be
construction brush. It is very easy and quick to paint all scars.
tires. After painting the swan is better not to touch at least
day, and better two, until the paint is completely dry, so as not to
spoil your creation. If you plan to use swan and
next year, you will need to varnish it, otherwise
in the rain, your snow-white swan will turn into an ugly gray
duckling. The varnish will help preserve the appearance of a swan for many years. AT
On this principle, your work is finished, it remains only to put
your swan to the garden. You can stop at this stage, and you can
go ahead and make another couple of swans by putting them in
artificial pond!

It is worth noting that this is only one of the variations of the swan, which
можно сделать своими by hands. If you like it, then you don’t
leave aside others. ATот еще несколько примеров.

Homemade swan in the pond

To make a swan in the pond we will need just one more
wheel. Paint the tire blue and gently land the swan
в wheel. For greater reliability, you can fix it with glue. ATот и
everything! У вас получился лебедь на волне, сделанный своими by hands,
which is now nothing scary.

Лебединая клумба своими by hands

To further diversify your garden, you can make
your already finished swan is a real flower bed. Enough
just put a tall pot of bright flowers in the middle of a swan.
This flowerbed will look great in colors and fit into
absolutely any garden.

Tire Swan is a versatile and crisis decoration.
for garden. I hope that you will never have the desire
throw a tire, knowing what kind of swan you can make from it.