Вт, 12 июл 2016 Автор: Ксения Рахимова
The technique of making colors from satin ribbons came from a distant
Japan
Women gladly decorated their hair with numerous
garlands on holidays.
On weekdays, the outfits were modest.
The order of weaving is simple.
Differs in detail and brightness of the used paints. Flowers
made of cloth only.
Contents
Simple technique of making flowers kanzashi from satin
tapes
An example was a live rose flower. Can use satin
fabric, for example, pink shades, in contrast to the
drawing Рекомендуется приобрести в магазине атласную tapesу с
two-sided gloss 125 mm wide.
Tools and materials at hand: fabric of different shades,
needle and thread to match.
Step 1
В руки берется tapesа. The top corner is tucked and sewn
on double stitch.
Step 2
The tape is rolled into a roll on 6 turns. Edges should
rolled up exactly the same.
Step 3
Теперь tapesа сгибается под углом в 45 градусов, а потом
turns around once formed roll. For successful
закрепления ткани и поддержания нужной формы — tapesа
stitched.
Step 4
In a similar technique at an angle of 45 degrees, the future rose
folded further. Each turn of fabric is fixed by a stitch.
Step 5
Когда роза обретет нужную форму и объем, атласную tapesу можно
cut and sew the tip to the bud.
Step 6
In conclusion, in the overall picture of the fabric are rolled up the rest
цветы канзаши из атласных tapes. Each flower is sewn
scrunchy. After that, the jewelry can be worn on the head.
A few flowers will make a wonderful ensemble on the rim for
heads.
Цветок розы в технике канзаши из атласных tapes
The second experiment with creating a rose with your own hands is even more
is interesting. Now the future rose will be airy and tender. All her
the petals will sensually tremble from the breath of the breeze or when
the slightest movement hostess decorations.
Tools and materials at hand: satin fabric pleasant
red, satin fabric green, a piece of felt
green, barrette, paper, ruler, pencil, scissors, thread,
needle, candle, matches, tweezers, glue, white wire and
foil.
Step 1
A paper pattern (or pattern) of rose petal is made. On
Figure paper is lined on centimeter squares. Pencil
a sketch is drawn and cut with scissors.
Step 2
The pattern is cut satin petals in the amount of 6 pieces.
Step 3
According to the pattern with an allowance of 0.5 cm, more petals are cut in
the number of 6 pieces. They are accordingly larger in size.
previous.
Step 4
The paper template is cut with scissors around the edge of 0.5 cm. From
he still has very small petals in the amount of 6
pieces
Step 5
All the resulting petals of the future flower are processed by
edges to exclude shedding of fabric on sections. For this
the candle flame is lit. Each petal is brought to him and his
the edge melts a little. At the time of melting, it is important to stretch the fabric.
This will give the petals the desired waviness. So around
perimeter.
Step 6
On огне лепесткам придается вогнутая форма. For this каждый из
they are taken with tweezers and held for a split second by the flame of a candle. the cloth
Itself a little curtailed.
Step 7
Build petals in the bud. There are two assembly techniques: when
the petals are sewn in a circle, and when joined in a checkerboard
okay Choose any method yourself. With the help of a needle and
each petal stitches sewn on the bottom edge in one bud
цветка канзаши из атласных tapes своими руками.
Step 8
Flower stamens are made of wire and foil. Foil
on the wire must be fixed with glue. Then
Ready stamens are inserted into the center of the bud and stitched.
a few stitches. Some craftswomen make stamens from cotton
sticks. In this case, cotton tips are recommended to paint in
the desired color and after drying the paint, apply a layer of glue so that
bright beauty is not washed off if the decoration falls under the rain.
Dressed last happy with petals.
Step 9
Изготовление листвы цветка канзаши из атласных tapes.
Используется tapesа зеленого цвета, длиной 10 см. Ее края
processed by a familiar method at the flame of a candle. Corners of the future
the leaves are bent to the middle and bottom stitch basting seam that
allows you to pull the fabric to create a wave. Sticking with
the underside of a strip of fabric is sewn with a secret seam.
Step 10
A circle or oval is cut out of the prepared piece of felt. On
leaves are glued to it first, and then a rose. This process
occurs by applying hot glue.
To felt sewn hairpin. That’s all gentle
tremulous rose for head decoration is ready!
Шар из цветов канзаши из атласных tapes
It is popular to have a coffee tree at home or similar coffee
composition. What if someone has a coffee allergy? Or simply
don’t like the smell? Make a kanzashi flower ball out of
атласных tapes. It is very beautiful and complements the interior. Japanese
traditional highlight.
Tools and materials at hand: foam plastic, cardboard for
трубки, клей, атласная tapesа, фетр (или мешковина), нитка, иголка,
scissors, a figure ruler (or compasses), a pencil.
Step 1
A round base is made for the flower. For this рисуется круг
on felt (or burlap).
Step 2
The circle needs to be shaped like a cone. For this в нем
рисуется треугольник, как указано на drawing The circle is cut.
A triangular segment is cut off with scissors and sewn together with a secret seam.
the edges of the mug. It turned out a cone. The wider the triangle is made, the
higher and sharper will be the cone, and, the smaller ball in the end
work out.
Step 3
On конус накладывается атласная tapesа, края которой пришиваются
to textile basis.
Step 4
Атласная tapesа сгибается под углом 45 градусов. The fold is fixed
stitch.
Step 5
Остальная tapesа складывается далее по кругу. Corners can
change.
Step 6
When the fabric has covered the entire cone, it is cut off and hides.
under the flower. Additional kanzashi flowers are made from
атласных tapes аналогичным способом.
Step 7
A ball is cut from the foam. A cardboard tube is rolled up.
The position is fixed with glue. The tubule is decorated with decorative
элементами: тонкой tapesой, цветной бумагой. In a foam ball
a recess is made for the tube that is inserted there,
pre-lubricated with glue.
In case of impossibility of use in work of polyfoam, it
replaced by crumpled paper wrapped in duct tape.
Step 8
On получившийся шар приклеиваются цветки канзаши из атласных
tapes. The ball is decorated with pearls.
It is recommended to put the kanzashi ornament in a small pot with
decorative filler.
