Чт, 25 авг 2016 Автор: Даниэла Нефедова
Most garments can be made
on their own.
Skirts, pants, T-shirts, jackets and coats are not uncommon when
needlewoman completely, from scratch creates your own wardrobe.
The process of creating high-quality, high-quality shoes will require
masters of not only significant material costs, but also the presence
tremendous experience that can be hard to get
on their own.
Therefore, start better with the simplest shoes – slippers
do it yourself is very simple, and besides, use
You can those materials that are already at home. So for this
Products will be required:
• Old slippers or any comfortable shoes for example if
standard pattern does not fit;
• Tracing paper for transfer and removal of patterns, graph paper
in order to more accurately build patterns;
• Leather, leather substitute, suede, drape or whatever
material suitable for a sole;
• Material for the top;
• Scissors, knife and awl (if used are very dense
materials), needle, thread (the ideal option would be a choke, but
suitable and durable silk, cotton in several additions),
pins (ordinary and English), tailor’s chalk or pencil
(You can take a piece of dry soap), glue;
• Decor elements (if necessary);
Contents
Home slippers do it yourself from … ordinary towels!
Old slippers will be useful not only to remove the pattern.
For example, for this model, slippers will have to cut off the top, leaving
rubber sole, which then will need to sheathe a towel like
shown in the picture:
Choose a very old, worn towel for the product is not
recommended – large area worn on terry cloth
will not look very presentable. If the material is strong
fallen from time to time, it should be steamed with an iron, and then carefully
combing with small scallops – usually it helps to bring back to life
even stale cloth.
Unfortunately, these sneakers are not suitable for wearing in those houses where
the plank floors are laid – even well-polished boards can
cling to the material, which ultimately will shorten the term
shoe service. However, if this model is still liked,
it is recommended to do “prevention” – on the sole in the place where it is
in contact with the floor, you should sew or stick a hard skin or
drape in several layers. After the improvised sock
wear out, you can simply replace it.
Совет: при склеивании полимерных материалов
(artificial leather, rubber, etc.) with each other
use the so-called “second” glue. The fact is that
It works on the principle of a very powerful solvent, simply
welding both layers into one, so this gluing will serve much
longer.
If there is no problem with the floors, then you can pay attention to
next model. It may rightly seem short-lived,
however, it is easy and quick to sew. For her, as shown in the picture,
you will need cotton fabric of two colors – it is better to take a single color
for the front and printed pattern for the inside:
But for the manufacture of the following models can be used
an old sweater lying in the closet. Before sewing the fabric should
inspect for minor defects, wash if necessary and
to iron. If a sewing machine is used for sewing,
It is worth buying needles designed for knitwear. In addition, the edges
tissues must be carefully processed, otherwise it will crumble before
Slippers will be ready. Overlok in this case is hardly suitable
therefore, the edge can be machined with a zigzag machine stitch or manually
loop and then lubricate with a special glue for fabric,
always waiting for complete drying. Only then can
start sewing such bright slippers made by
type of popular “slip”:
Or such original ones are not even slippers, the most
these boots, somewhat like uggs:
Lovers of the motives of the Far North in order to maximize
to bring the product to the boots, they can trim the sneakers with fur – its
It will take a little, and you can even use trim. Besides,
decorate slippers and embroidery in the form of traditional deer and
snowflakes, which can be performed with a metallized thread.
Совет: если полы холодные, и ноги мёрзнут,
can be added to the design of homemade slippers add lining
from natural or artificial fur. In case the shoes
performed according to the principle of boots, as, for example, is shown above, then
the lining pattern can be made in the form of a boot, then paste
inside slipper, straighten and tack in several places. but
however, if there was no fur, it is possible to insulate slippers and
a synthetic winterizer, quilted fabric on the sewing machine or manually.
If making slippers do it yourself seems
complicated, then you can practice at least on the decor already
available:
Home slippers do it yourself – for true connoisseurs
traditions of the Middle Kingdom
Greatly addicted to Japanese themes for sure will have to
taste the next model. It is best made from cotton fabric.
with the desired pattern, however, if this was not found, you can use
and silk (especially if the carpet is dominant in the house). Besides
Moreover, you can paint the fabric yourself – just buy
special paint or apply the technique of “patchwork”. In the last
In this case, all fabric trimming in the house will be used, which
difficult to apply for sewing something large in size. Necessary
the elements are put into place and then sewn onto the machine.
zigzag stitch. The process of creating Japanese slippers is shown in detail.
on the picture:
Finally, the latest model is extremely simple in tailoring,
so great for beginners. To make these
home slippers do it yourself, you only need a standard set
tools and materials (scissors, needle, thread), as well as very
dense felt of two colors. The resulting slippers are great
suitable for people who for some reason or other are uncomfortable closed
models:
