Вт, 23 авг 2016 Автор: Даниэла Нефедова
Bow tie – a recognized attribute of both female and
men’s wardrobe; it is usually made of silk or
cotton fabrics, wool is much less common here.
It is also interesting that there are several wearing options:
a classic one who will wear this tie should
self-fix it every time, tying neat
knot in the middle, when both in a simplified tie is already formed on
factory, and it remains only to fix it behind, using
Adjustable collar shirt zipper.
However, rush to the nearest clothing store for new clothes
not necessarily at all – much more interesting, cheaper and even
more original will try to make such a bow tie
do it yourself Work should begin with the preparation of all necessary
materials on the list. So, we will need:
• Satin ribbon of the desired color – comfortable, recommended for
sewing width starts from four centimeters. Length is one
meter.
• Satin ribbon narrower, about a centimeter wide – the desired length
will also be equal to the meter;
• Ordinary matches or clear nail polish come in handy,
to process the “loose” edges of the tapes;
• Needle (preferably thin), scissors, and also reel or
silk thread in the color of the tape;
• Hooks, velcro, buttons or any fastener convenient to you;
• Glue for fabric – in the event that you do not like to sew ;.
Usually a tie of the type that we will consider in
This article consists of two bows – one that is smaller in size,
superimposed and fixed on the large. However you can do and
a butterfly is simpler – then it will consist of only one bow,
tied with a ribbon.
A small digression: the low complexity of crafts here
allows to do without seams, using only glue, but
improvised “stitches”, that is, gluing places in this case
It is recommended to iron iron on acceptable for one or another
fabric temperatures. However, it is necessary to take into account the fact that some species
Adhesives may not be intended for heat treatment.
For a tie of two bows, prepare two pieces of ribbon – one
shorter (twenty-twenty-five centimeters), another is longer,
thirty to forty centimeters long.
If there are no satin ribbons, the butterfly can be made from
Kapron, but note that then all seams will have to be carefully
hide because they can be seen through the fabric. If you
decide to make a tie from cotton ribbon or wool cut
fabric, then be prepared for the fact that such material may be
rather coarse in structure – which means that with drapery,
Most likely, there will be some difficulties.
Pretreat the edges with clear lacquer or flame,
take a piece of tape of twenty centimeters and fold it in half,
combining the ends of matter. The resulting joint must be at the back,
so if you see it in front of you, turn the butterfly face
side to yourself. With a seam “forward needle” we perform the assembly exactly
in the middle of the workpiece; at the same time try to overwhelm and flash
rear ends. In the end, the thread will need to
tighten and fasten, for strength, you can even wrap the place
assembly thread and glue. Make sure that the glue is
as transparent as possible and did not leave ugly yellow spots on
tissue. If there is no suitable glue in the arsenal, the assembly place can be
also smear clear nail polish. Big bow
performed similarly, then the bows are connected by imposing
small to big. The junction can be either flashed or
to glue.
Совет: если Вы решили сделать простой
do it yourself bow tie bow tie
the tape is slightly wider, say, five or six centimeters wide. Assembly
it is recommended to make it more lush: for this, having completed one stitch
�”Forward needle”, you need to make two arc-like seams with each
sides as shown in the picture:
Prepare a narrow, centimeter wide ribbon – it will be
perform the role of a foundation that holds a butterfly and fits under
shirt collar. The length here is selected on the basis of their own
sizes, plus a few centimeters in case you
plan to attach adjustable clasps.
Edges to which convenient fasteners will be sewn, not only
singe or lacquer, but also strengthened. You can do it
in several ways: the tape is slightly bent and stitched
close to the edge, if desired, you can sew a square of fabric, edges
which is not showered. It can be felt, drape or even leather.
substitute.
Cut about three to four centimeters from a wide ribbon. This
we will need the piece in order to close the assembly place on the small
bow; the required length should be chosen not end-to-end, but taking into account
the fact that the butterfly will, if necessary, move along the tape.
However, if you want to leave a tie static, you can simply
sew it to the tape, but in that case it will have to be very accurate
calculate it position on the neck.
The ends of a piece of tape are sewn back into a ring, and thus
tie can move freely around the tape.
Contents
Do-it-yourself bow tie for … pets. Fashionable cat!
If your pets are wearing a collar, then the butterfly can
do for them – then a thin ribbon base is not needed. Bows
collected in the manner presented above, and the finished butterfly
attached with thread or glue on the collar. In case the animal
shakes off a product or feels uncomfortable from such an idea
better to give up.
Handmade ribbon tie decor
Bow tie decor options are plentiful.
Can be used as artificial or natural, precious
or semi-precious stones, as well as ordinary applications (for example,
in the event that the butterfly is intended for a child). Fit and
small glitters that need to be “planted” on a special glue,
for example, this is how you can decorate a homemade tie, causing
powdered glitters along the lines marked with blue dotted lines on
picture:
A handmade bow tie can become like
an original gift as well as a luxurious, exclusive item
a personal wardrobe that you would never search for anyone
a friend.
Wear it with pleasure!
