Чт, 12 янв 2017 Автор: Марина Ивасюк
Bonbon is one of the varieties of patchwork blankets, made
in a special technique. To make such a blanket will have to work hard
but then from the finished product will not be able to look away.
Contents
Bonbon blanket do it yourself: materials
For изготовления такого одеяла вам потребуется много
ткани, наполнитель и крепкие нитки. In sewing a blanket bonbon
do it yourself with your own hands: scissors, measuring tape,
needles or pins for fixing the fabric and sewing machine.
With regards to the material, it is important to note that
use fabric of both the same type and different. For example, for
the top or front side will suit any beautiful even
synthetic fabric, and for the bottom or inside of the blanket
it is preferable to use natural cotton
materials, satin, flax, poplin and so on.
Best for a blanket as a filler.
synthetic winterizer or holofiber. Batting is also suitable for these purposes.
It is worth noting that this is a heavier material that absorbs quickly.
and retains moisture for a long time. However, many mistresses who
sew blankets with their own hands, give him preference and called batting
natural insulation.
Ways to make blanket bonbon do it yourself
By itself, a kind of bonbon blankets suggests
small independent pads with filler,
assembled closely with each other on a single canvas. So-called
bubble effect. However, there are several ways to
would get such a result and make a bonbon blanket
by hands.
Bonbon blanket from individual pads
For this blanket you will need two types of fabric: front and
internal. The facial tissue is taken beautiful and bright, and for
the inner fabric will fit the usual not remarkable. After that,
as the blanket will be ready, the inner fabric will not be visible, therefore
You can use unnecessary sheet.
Make a template in the form of a square, which will need to be
cut into details. You define the size of the square, but it does not
should be less than 7 × 7 cm. and more than 40 × 40 cm. otherwise a blanket
it will turn out not beautiful.
According to the ready-made template, cut the required number of parts from
facial tissue and the same amount from the inside. Connect between
are squares of different fabrics so that the upper fabric is
turned face up. Sew three edges first,
add filler and sharpen fourth. Repeat this job
with all the details. You should have a lot of little ones.
pads that now need to be stitched together.
First, sew the pads in the form of lines along the side seam. In each
should be the same number of pads. Next line the lines
among themselves, strictly observing the ranks and avoiding distortions.
After that, как полотно из подушечек готово, вам нужно добавить
bottom fabric. To do this, take a natural cotton
material. Lay the bottom fabric first on a flat surface.
face down on her canvas cloth face
up.
If you want to make the blanket even warmer, you can between these
fabrics put a layer of padding polyester or batting. Fasten the layers with needles
or pins and stitch a blanket along the edge along with the trim. For
edging use an oblique inlay or ribbon of fabric from which it is sewn
a blanket.
Bubon Bonbon Blanket
As for the bubbles, this is more of a joke. In the process of sewing
one gets the feeling that the fabric has exfoliated and gone blisters.
This effect can be achieved when to a whole large canvas.
fabrics are sewn onto small squares one by one
to others.
For этого вам потребуется решить, какого размера вы желаете
see the squares on the blanket. They may depend on your
desires both big and small.
Prepare the canvas base. It must be the same size
which size you want to see the final product. Scribble when
using a pencil or soap on its inside
dimensions of the alleged bumps. Markup needs to be done throughout
the surface of the fabric as shown in the picture.
Now you need to make a pattern for shreds that
will be larger than the size of a single drawn cell. Add to
cage size 2-3 cm for each side and plus 1 cm
overlap. Cut out the template with the resulting dimensions of cardboard and
make it parts from another facial tissue that will
stitched on the markup.
Sew the cut squares with one another in a long line.
The number of squares in the line will be equal to the number of squares per
fabrics in one direction (horizontally or vertically).
Do this job with all the cut out details.
Now sew strips to the fabric, with for each pad
fold the excess fabric so that there is a seam between
pads matched with drawn lines.
Pull the bottom of the pads to the line of the pattern, bending the extra
pleated fabric. Fix the pads on the fabric when needles care
or pins. Sew side seams strictly along the seam between
squares.
Now comes the moment when you need to decide whether you want
stuff pads immediately after sewing each line or after
sew all the pads. If you decide to stuff pads
immediately, then first make a fold at the bottom of each square, not
grasping it with the base, and tamp with filler. After neatly
intercept the pin and interlock the upper fabric with the base.
Next you need to sew the next strip. For этого ее сначала
folded, and then sewn to the previous strip.
The fabric should be facing the front.
Next you need to do the same: fold and sew the side
stitches and folds, and then drive the pads with filler, make
bottom fold and sew the next strip.
You can also fill the padding with a product after
sew all the pads. For этого делается небольшой разрез на
bottom fabric pads through which you fill it with padding polyester.
Then you will need to sew the cut manually.
After that, как основное полотно одеяла готово необходимо
process the edge. For этого подойдет как косая бейка, которой вы
wrap and sew a hem out or cut a strip of fabric. Her
width from 3 to 5 cm, and the length is equal to the length of the side of the blanket, to which
you will sew it. Do not forget to tilt
cut edges inside.
Do-it-yourself bonbon blanket: professional advice
• Consider drawing a blanket in advance, draw it on paper or
in the computer and paint in the desired shades.
• Do not skimp on the filler, because the lush the pad,
the more interesting the whole product will look.
