Today it is difficult to find a summer cottage or garden, not decorated
all sorts of colors.
Flowers are not just about adding beauty.
on the site, but also to refresh the interior and attract attention
passers-by and guests at home.
Flowers and decor can be found not only in private farms,
gardens and gardens, they are also intended for landscaping urban
places (parks, squares).
The owners of private plots grow not only ordinary
seedlings, sometimes there are true works of art.
For placement of flowers and various plants vases are required,
which can be done independently.
This is what this article will be about.
Contents
Types of flowerpots
Room
This type of pot can be divided into ordinary and
portable, having simple and complex forms. To make them
can from different materials: wood, stone, polymer concrete and so
Further.
Street
As for outdoor products, they are much larger in size.
pot pots and located exclusively on the street. Getting ready
they are either plastic (economy version) or polymer concrete (more
expensive stuff).
Decorative
Decorative изделия не занимают много места и частенько
meet where the area is very limited, usually it is urban
yards
Lined Entry Groups
This type is perhaps the most common. Are placed
they are usually on poles, pedestals or on the ground.
Vases of concrete with their own hands
Do the owners who want to decorate your site attractive
outdoor flowerpots, there are 2 options: buy ready-made, or
make them yourself. The second option is much more
attractive because, in addition to substantial savings, you can
make the pot to your taste, the benefit, the choice of materials is impressive.
Let’s start with one of the most simple: concrete flowerpots.
To begin, prepare the following
Components:
-
2 containers with different diameters;
-
cement solution;
-
spray gun;
-
vegetable oil.
Manufacturing process
1. To begin with, treat with oil from the inside a large container and outside
smaller capacity. Then cut a few pieces of 5 cm from
plastic pipe, they will be needed for drainage. Prepare the solution
cement. If you plan to make your product color, add
in the solution a little color scheme.
2. In a large container poured a layer of solution, ideally 2 cm.
We insert the prepared tubes and wait until it hardens. Omit
In a large container, the capacity is smaller so that it lies on the tubes. After
This carefully fill the gap between the containers with the solution.
3. Accident 24 hours when the solution is finally
grab, gently take out the smaller container, and sprinkle the solution
water, not getting from a larger container. We wrap our product in
film and for 6-7 days regularly wetted to cement
stayed wet. After 7 days the finished product must be neatly
knock out a larger container. Our pot is ready, you can safely plant in
him flowers and decorate the plot.
Vases of outdated things with their own hands
To make vases for the street, you can use any
old things, from all sorts of buckets, jugs and ending
obsolete shoes and beer bottles.
An old plate is potentially great for
create a pot. All you need to do is hold a little.
plate over the heater so that it warms up well and
became plastic. After этого ей можно будет придать любую форму,
most importantly, do everything carefully so as not to get burned.
It is possible to decorate such a pot with the help of broken glass, all kinds of
мелких камушков, ракушек и так Further. Here comes to the fore
your imagination and fantasy, the only thing you need is good
build and pick up decorative items. Easiest
to finish the product using colored glass, fixed tiled
glue.
Cracked dishes will look great as an element of decor on
plot. If you have old pottery, then with its help
can make any part of your home very stylish and
original.
If in addition to outdated dishes there is also the same furniture,
You can try to combine them. For example, well painted
and decorated jug or pot can be put on a chair or
the nightstand, it will be a great base for a flower bed.
Flowerpots from a stump and the cut trees the hands
A stump is not necessarily the remains of an extinct tree, it can be
use with great benefit. For example, you can put in it
a flower bed, that is, you already have a yard
ready basis which needs only to be adjusted under the
requirements. All we need for this is a drill and
chisel.
First you need to make some amount on the stump surface.
holes, depending on its thickness. Try to make
holes as close as possible to each other to work with wood
it was easier.
Then through the chisel need gently extract from the inside
wood This process needs to be continued until you
Reach the need for your future flowerpot depth. Pot volumes
may vary depending on the strength and size of the stump itself,
if the wood is rotten, the walls should be thicker.
That’s the whole procedure. Fall asleep inside the stump ground and plant
ground: the pot is ready.
A pretty good option can come out of the cut trees, and
exactly birch. Planted plants in the pot itself is not recommended
because wood with frequent watering can begin to rot.
Therefore, inside the carved branch of the tree you need to put some
горшочек, который не даст влаге разрушать wood
That’s all the tips. Do not limit yourself in fantasies and transform
your plot to the real work of art!