In the era of gel-varnish coating procedure extension
nails faded into the background. Why all? Yes, because I myself
процесс моделирования ногтей сложный и трудоемкий, а у beginners
Masters do not always have the desire and opportunity to undergo training.
Some consider extended nails to be vulgar and not natural,
no matter what anyone says, the build-up takes place in the modern
nail industry. After all, not every girl can grow nails
desired length.
Contents
Material selection
If you are planning to do nail extensions exclusively for
yourself, then pay attention to your nail plate, its shape and
strength. Based on the data obtained, try to determine
type of material to build. Here are the main ones:
- Gel. One of the most popular tools for
increase and strengthen the nail plate. Modeling gel
becomes very dense and fixed material after
polymerization. Its structure is smooth, viscous, in some cases
quite thick (gel soufflé). Color may be the most
varied, to facilitate the implementation of manicure design. Main
lack of gel – when drying a thick layer of material occurs
heating, and nails can very strongly bake. In this case
urgently need to get your hand out of the lamp, wait 5-7 seconds and
continue drying the gel. - Acrylic. Liquidation is necessary for such buildup.
(special liquid) and acrylic powder. Coating strength
increases several times in comparison with gel. but
toxicity, risk of allergy and strong odor present. - Akrigel In the market of nail industry appeared
relatively recently, and won the hearts of all masters. Arigel
(polygel, acrylate) is a duet of acrylic and gel. His strength
compare acrylic, no odor and ease of use as in gel
system, only better, because he absolutely does not bake in the lamp.
All these systems for nails of different price
range, the gel is the cheapest, then comes acrylic, and acrigel
considered the most expensive material.
Ways to build
Some masters are so professionally familiar with the procedure.
nail extensions that are able to increase the small length of the nail
plates even using a rubber base. But for beginners first
need to be familiar with the options for building. On
today there are three ways to lengthen the nails:
- With the help of tips. The method is outdated, but rather
plain. On предварительно обработанную ногтевую пластину
glued in a special form of silicone or plastic. Next on
it is applied gel and the actual design. Minus of this method in
possible injury when removing glued tips. - Thanks to the foil form. Marigolds also
processed, free edge cut down under “zero”. Butt
the natural nail is stuck in sticky form and tight
is fixed. The nail is covered with a thin layer of the base, dried in
a modeling layer of your chosen material is then applied to the lamp
for building. After complete polymerization the form is easy
peel off, and irregularities in the joint zone can be cut out
frezerom. - Using the top forms for building is very convenient.
and practical. But, it is important to consider the fact that
building up is possible only with the help of akrigel, because of his
souffle consistency. First you need to choose a form for
the size of your nail plate, usually in one package
dozens of forms are sold, so you will definitely find your
the size. On внутреннюю часть формы накладывается акригель,
flattened with a brush and applied to the marigold. In this form
dried material, with the first 10 seconds you need
keep fit with your free hand so that air does not form
pockets. Forms can be easily removed and many more can be used.
time.
Choosing for yourself materials for nail extension
on their material capabilities and preferences.
Preparation of a natural nail
Many new masters neglect the preparation
natural nail, but in vain. To artificial cover kept
long, you need to perform the following steps:
- cut the cuticle;
- clean pterigy;
- cut down the glossy layer of the nail;
- several times degrease the nail plate (until
the skin around the nail turns white); - apply primer.
Poor quality manicure will lead to artificial detachment
cover. The sawdust nails should be light in order not to be injured,
but it is impossible to avoid this stage, with its help artificial
the material adheres to the nail flakes.
Топ ошибок beginners мастеров при наращивании
Carefully prepared for self-nail
I want to avoid possible mistakes. Let’s look at the most
common ones are:
- Not dried out material. It happens because of
a thick layer of material that can not dry out in thin
lamps. It’s better to lay out several thin layers of material than
one thick. - Incorrectly set foil forms.
If a your nail plate is trapezoid shaped, then you need
pay special attention to the area of growth of nails. Forms can be cut
with scissors so that the area of the growth of the nail completely touches the form, and
there were no gaps. Due to the fact that in the area of the side rollers may
there is little building material, marigolds quickly
will break. - Incorrectly built nail architecture
пластины приводит к тому, что на апекс производится
strong load and nails break easily. - Allergy. Choosing materials to build
better guided by experienced users to not
stumble on fakes. - Fungus. Most often, the fungus appears after
коррекции, когда не были устранены воздушные pockets. - Незапечатанный торец приводит к отслаиванию
натурального ногтя от искусственного cover. - Затекающий материал на кожу приведет к
detachment.
For every beginner manicurist important
pay attention not only to their professional mistakes, but also
emotional component. Watch your mood
benevolently disposing to the client, and you must have everything
work out.