Many people are thinking about how to make soap
they consider it a very laborious and costly work, and easier
buy already finished products. However, this is not the case, and
through the master class, described below, we will try
prove that it is not at all difficult.
Contents
Как сделать мыло do it yourself: как производится процесс,
advantages and main components
In fact, this process is quite simple, and everything from you
it takes a little time and effort, in return for what you can
Get your original bar of soap! Besides the soap,
cooked on their own, there are a number of advantages over
familiar, namely:
1) the first and most important advantage of household soap is
the fact that you are well aware of what components are included in its
the composition, since it is you who select them, and there will be nothing in it
superfluous;
2) home soap provides a soap base that does not contain
no harmful substances that can harm in any way
your skin, because this base does not dry it and cannot cause
allergic reaction;
3) and, of course, it is worth mentioning originality, because your
a soapy piece will be unique and unique in appearance with amazing
a smell that will give joy to you and your loved ones!
Homemade soap will consist of the following
items:
-
soap bases;
-
base and essential oils;
-
dyes;
-
forms;
-
alcohol;
-
chocolate, honey and so on (optional).
Мастер-класс на тему как сделать мыло do it yourself
Here we come to the most important, directly to the very
процессу изготовления household soap. Master Class Proposed
us, will occur in stages, and it will consist of six
simple steps, passing that you get your unique piece
soap.
1. Melting the base
First we need to grind the base. To do this, you can
Grind and cut into small pieces with a knife.
Melting can be done in one of two ways, each of them
involves direct contact with the stove. In the first case
you need to melt in the microwave, in the second – on the water
bath.
This is a very important stage, because you will not get a good
soap, if the soap base was not melted, and heat it
follows only until this happens.
Важный момент: следите, чтобы основа не
heated to temperatures above 60 ºC. To track this
moment, you can use a special thermometer for
liquids. If the temperature is not observed, the soap immediately
dry and work will be spoiled! Therefore, if the base melts in
microwave, it is desirable to monitor the temperature every 30-40
seconds to avoid incidents.
2. Add essences
Professionals recommend starting the process with a mixture of additives and
essences, as they help to perfectly change the color of the base.
For example, some of the varieties of coconut essences that
prepare exclusively for soap, are able to color the white base
in a pinkish tint.
Thus, when the base is already heated, it is time to introduce essences,
such as, for example, good perfumes, aromatic essential oils,
which can be purchased at the pharmacy, or natural products like chocolate
or honey. As for purchased essences, they should be used in
the ratio of 5 ml per 250 g basis, that is 2%. Using
food flavors, their number may be several
more.
Учтите, что ароматы бывают разные, и будьте
careful when choosing them, because in some they can cause
allergic reaction.
3. Making tint
For tinting our homemade soap, almost anything fits
what comes to your mind! Also note that food coloring through
some time lose their color. There are many types
dyes that can be purchased in specialized
shops. They need to be added gradually, because if
need, at any time the basis can be tint.
If you add extra paint, there will be such unpleasant
moments like colored foam and the risk of repainting yourself and the bathrooms
accessories in any other color.
4. We use other additives
To make your homemade soap some moisturizers
properties, you can add all sorts of vegetable oils. But
Do not be too zealous, the dose should not exceed 1 tbsp. l
on 500 g basis. Here will fit the elements that were chosen by you
as a scrub, such as sugar, ground coffee and so on. If a
To exceed this dose, your soap will become too relaxed and
wet, and thus not able to harden.
5. Pour into molds.
Any capacity can be a suitable size,
This cheese or pate tray or plastic boxes. So that later
it was easier to get the dried soap out of the forms, they need to be thoroughly
lubricate with corn oil.
If a вы любитель экспериментов, попробуйте несколько приукрасить
your product. To do this, you can use some
relief forms, and in the recesses through the pipette can be
apply a mass without dye. When the dye will be added to
basis, you can continue to fill the mold.
After spilling our soap into molds, it may appear
air bubbles. So do not forget to prepare in advance
Spray bottle filled with alcohol. With just one movement
The device can ensure that the bubbles immediately settle.
6. Remove the soap from the molds.
If a формочки были предварительно смазаны, то достать мыло у вас
not difficult. Otherwise, our product may not
maintain its integrity. After the soap hardens, its
can be used for its intended purpose. If a вы не будете им пользоваться
Now, in order to avoid drying out, it is recommended to wrap it in
polyethylene film.
That’s all. As you can see, making the soap yourself is not so
difficult, all you need is a little time and a drop of fantasy, and you
You can please yourself and your loved ones with an amazing crafts!