DIY parrot: children’s scheme. Complexquilling technique making lovebirdsby hands

Чт, 30 июн 2016 Автор: Ксения Рахимова

If you want to have a parrot at home, but there is no possibility
ухаживать за ним ежедневно — можно сделать его своими by hands и
get visual satisfaction.

Exotic bird must be bright and
multi-colored.

Looking at such an article of thought, they will fly by themselves to the southern
country.

Contents

Простой попугай своими by hands из бумаги

Making such a parrot is desirable in the company of children.
Fun class. No more than 2 will be spent on its production.
weekend hours.

The following materials will be needed: colored paper of all colors
rainbows, white A3 paper, compasses, pencil, ruler,
scissors and glue.

Step 1

A parrot’s body is made from a large sheet of white paper.
by hands. The sheet is rolled and glued. From the top is cut off
strip equal to 8 centimeters. This can be done before use.
in the work of glue.

Step 2

Cutting feathers. To do this, take 4 colored sheets of paper, as
indicated in the figure. They cut out the strips, which are bent in
harmonica This is done to save labor when at a time
You can cut several feathers for the figure. When folded
the strips will be cut into smaller parts, the contours will be cut
feathers. The edges are folded manually upwards. Can use
scissors and try them gently bend the edges. Measures
precautions are required.

Step 3

Feathers are stuck on the body of the parrot. They are located friend
under friend in chess order. From the top row and down. Can
on the contrary, from the bottom up. Ряд насчитывает 10 feathers. Recommended
visually highlight the center of the breast and stick one white
pen.

Step 4

Constructing the eyes. For this, a circle with a diameter of 7 is drawn on the paper.
see. To get plumage, the paper is cut into small strips,
as in the picture. According to the previous scheme, the resulting plumage around
the eye is also bent.

Ovals for pupils are made from black paper. Still
will need little white roundels to create a glare in
eyes.

Step 5

Billet beak. Red paper cut out two
rectangles that are trimmed at the edges, as indicated by
pattern.

Further, the corners of the upper beak are glued together so that they both
matched. After that, the finished beak can be glued to the body.

Step 6

Creating paws. From 2 pieces of paper of red color
6/6 cm paws are cut. To add volume, they are slightly
bent.

Step 7

Wings. Two bases are cut out of a sheet of white paper.
wings. Feathers are made from the colored paper shown in the picture.
для этих wings. Feathers it is important to slightly bend inside.

Recommended кончик каждого перышка немного надрезать и
to glue. This will add some volume to the parrot figure made
своими by hands.

All the resulting feathers are glued to the base of the wing.

Step 8

Making a crest. For this paper of green shades
cut into three strips 5 cm wide. They are notched along the edges of the
еще более мелкие полоски, которые так же bent.

The two resulting strips are glued to the top of the mirror
between the beak and the eye so as to form at the top of the intersection –
cross to cross The third strip is glued in the center of the visual
forehead area. She covers the other strips from above. Last
the crest is glued to glue to the rest.

Step 9

Tail. From paper of different colors on the same above
pattern made long feathers for the tail. And only now
The resulting small legs can be glued to the body.

Сложные попугаи-неразлучники своими by hands

Parrots, lovebirds in the technique of quilling – a difficult task.
Work will take some time. But the result is superior
waiting The picture looks like a living. Friends and relatives by
dignity appreciate such scrupulous work.

The ready scheme is taken. It can be printed through the printer.
or redraw directly from the monitor screen.

For the work will need the following materials: colored paper,
scissors, glue, tweezers, pins and a 15/21 cm panel. As a panel
It is recommended to use a simple photo frame in which
built-in glass. It will prolong the life of the future picture and
save it from dust.

Colored sheets of paper are cut into thin strips of 3 mm.
Each of the strips is twisted and bent gently in a droplet.
Can сделать это вручную. Can use пинцетом. Work in
This technique is more complex than the previous technique.
попугая из бумаги своими by hands. You may need to get used to
the method of proper graceful twisting and bending of paper. But this
only temporary difficulties. Paper is a very malleable material.

The resulting modules are glued from the sides of the figures to the center.
Recommended фиксировать некоторые детали булавками.

The head of the second parrot and torso raised above
surface 3 mm. Glue layer is more here. It gives
bulk image.

The tail of the first parrot is made of strips of size 1.5 mm
А лапки — 1 mm

The work ends with the design of the background with flowers and leaves. By
The edges of the frame are glued with a strip of colored paper with a pattern.

loading...
Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: