Cockerel costume for a boy with his own hands -colorful pattern. How to sew a beautiful costume cock for a boydo it yourself

Пт, 27 янв 2017 Автор: Марина Ивасюк

At the theme party in kindergarten or school teacher
can offer the child the role of cock. It looks like a complicated suit,
consisting of many small details.

Do not be afraid and run to the store for shopping
finished product, because you can sew a rooster suit for a boy
do it yourself.

Костюм петушка для мальчика do it yourself: материалы и
instruments

For self-sewing you will need the following
instruments и материалы:

• fabric for the body of the rooster yellow;

• fabric for a tuft and nose of a rooster;

• fabric for colorful feathers and tail of the rooster green suit,
blue and other colors as desired;

• wide elastic band;

• zipper length of 30-50 cm;

• scissors, tape, needle with thread, sewing
machine.

Fabric choose thick cotton, satin or
faux fur. If you want to add artificial costume
fur, but by the amount of it you have little, you can sew only some
elements of this material. For example, the top of the wings or
the back of the cap and shoes baby.

To the finished costume you can add decorations in the form of a thin
tinsel, wound around the neck of a child or sewn to the collar and
shoes.

Костюм петушка для мальчика do it yourself: комбинезон с
by wings

This costume is made in the form of overalls. Interesting because
He has a full big colorful wings, beak and even legs.
The wings are not sleeves, but rather a continuation of the shoulder, therefore
the child can manage them, and maybe leave them alone and then they
will just hang down along the body.

Stage 1

Before sewing, take the child’s measurements with
centimeter tape. Since the costume is a whole jumpsuit, you
the following dimensions will be required: collar circumference, sleeve length
(distance from shoulder to hand), body length (from shoulder to knee),
arm circumference plus 10 cm. for pomp sleeves, leg circumference
plus 15 cm, thigh circumference and chest circumference also plus 15-20
cm.

Stage 2

After you take all the measurements, proceed to the application
contour details on the fabric. In the process of drawing, transfer dimensions to
according to the pattern. Drawing is applied on fabric with internal
sides with a pen, pencil or soap.

Patterns for overalls will be as in the picture below. For,
to cut out the details, the fabric is folded in two layers and on the top
layer is applied drawing. After that, the material is held together with pins.
around the perimeter of the picture, and then just cut out.

In parallel, the pattern is drawn for the wing, which is sewn
separately and sewn to the finished product.

Stage 3

Details are cut out of fabric and sewn together. You must
get two details of the front side of the suit and two parts
back side. First, sew the two halves from the front part, and
then the two halves from the back part. Do not finish back seam
until the end, the zipper will be sewn into it.

You should have front and back details. Next, sew
them with each other. To do this, put them together face up and
stitch along the contour.

After that, attach the sleeve to the hole for the sleeve.

Stage 4

Into the back of the jumpsuit, sew a zipper, so that
the costume was free to wear. The zipper should unfasten from
The gates are approximately waist-deep, but not lower.

Stage 5

Turn the cut edges (collar, sleeve and edge of the pants) one
или два оборота и прострочите, отступив от края не более 1 cm.

In the sleeves and pants as desired, you can slip the gum.

Stage 6

At this stage, you can proceed to tailoring the wing. Cut all
wing details. For feathers, choose different colors, so suit
get brighter. Sew together the semicircular details of the feathers
colors. Turn the sewn feathers onto the front side and iron.

Stage 7

Spread two bases under the wings on a flat surface and
Spread semicircular feathers along their bottom edge. Make money
the product by hand using needles and threads so that when sewing
feathers are not scattered.

Stage 8

Draw together the elements of the upper part of the wing and
iron.

Stage 9

Fold the base of the wing with its upper part face to face and
stitch along the perimeter. Оставьте не прошитым отрезок 15 cm.
Turn the wing to the front side through this hole and sew
his secret stitch. Iron the wing.

Sew the second wing in the same way.

Stage 10

Sew a strip of fabric on the inside of the wing
brush baby. The baby will hold on to this strip and wave
by wings тогда, когда это будет необходимо. The rest of the time
the wings will not disturb him.

Sew the shoulder of the wing to the jumpsuit with a small seam in
two screed. It is necessary that the wing freely scroll around
its axis and not deformed.

Костюм петушка для мальчика do it yourself: шапочка с
beak

Sew such a hat is not difficult, the main sign that this
the cap belongs to the rooster – this is the presence of a red tuft,
red earrings on the sides and beak on visor.

Stage 1

Measure your baby’s head. For marking patterns need
know the circumference and depth of the head.

Stage 2

Draw a rectangle on the fabric whose length is equal to
окружности головы, а высота больше глубины на 10 cm., хохолок,
earrings in the shape of an elongated drop and a rooster’s beak.

Stage 3

Sew the short edge of the rectangle with each other. Have
cut the circumference cut the top edge in the form
triangles. Sew the cut corners together by inserting into
middle tuft.

Stage 4

Sew on the sides of the cap at the level of the child’s ears red earrings.
Sew on the front of the cap beak.

For the tuft, beak and cockerel earrings, you can use a red
felt fabric. A big plus of this fabric is that the cut
the edge is not processed and does not tuck.

Костюм петушка для мальчика do it yourself: обувь в виде
paws

Even the simplest version of the shoes for the costume rooster, too
requires removal of measurements. For sewing you will need a piece of tight
cardboard, yellow or orange fabric and elastic.

Stage 1

You need to know the length and width of the baby’s feet, as well as the height
ankle shoes.

Take the measurements from the baby’s foot and apply it on the fabric. Circuit
Details make the following sketches.

Stage 2

Cut fabric parts. On the upper details of the shoes cut
cut a round hole for the leg. It can be cut in
виде полоски из той же ткани, что и детали для shoes. Insert under
edging gum and stitch edges.

Stage 3

Sew the upper and lower parts of the shoes along the contour.

Turn out the resulting foot. Do the same with
the second shoe.

Stage 4

Cut out the cardboard form of the foot and insert it into the shoes. This
interlayer will help keep the shape of the boot. Wear such shoes
better with socks or pantyhose.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: